Adam´s Standard Snub Nose Pressure Washer Attachment - With Swivel

The ergonomically designed handle is constructed of high impact polymers for years of professional use. Included is a swivel on the bottom so you won´t have to fight the hose twisting on you while washing.

• Stainless steel and brass valves and connectors, 1/4" quick disconnect for sprayer tip attachments. ( Attachments not included)
• Swivel Bottom For Ease of Use
• Max 280bar – 4000psi
• Max 150 C – 300 F
• Max 25L/min – 7 US GPM
• 3/8" Male Quick Disconnect For Hose Line
• Made in China

The Adam´s Standard Pressure Washer Spray Gun attachment fits any pressure washer with a 3/8" quick disconnect fitting. This Snub Nose Pressure Washer Attachment is not compatible with all pressure washers - some additional hardware may be necessary for your specific brand of pressure washer, sold separately. Most pressure washers have a typical wand style attachment, but that restricts you from getting into hard to reach areas. This product combines the proximity of your hand with the same power you´re used to with your current pressure washer.

Directions:

1. Ensure water is off before disconnecting your current pressure washer grip.
2. Pull the quick disconnect sleeve back and pull the current pressure washer grip out of the high-pressure hose. (Different fittings may be necessary depending on your pressure washer application.)
3. Replace with Adam´s Snub Nose Grip and ensure the sleeve is properly connected.
4. Turn on water source before starting pressure washer usage.
5. Pull the trigger to start your wash!